| Precision
Stainless Folder Pivot Pins
|
1/8" x 3/8" L $2.50 each 15 or more $2.00 each drilled and taped for 2-56 Button Head Screws (included) 3/16" x 3/8" L $2.50 each 15 or more $2.00 each drilled and tapped for 4-40 Button Head Screws (included) 1/4" x 1/2" L $2.50 each 15 or more $2.00 each drilled and tapped for 8-32 Button Head Screws (included) |
| 82
degree Countersink
|
$
9.50 each For Flat Head
Screws. Double ended 1/4" shaft high speed steel Single end (better for 0-80 and 1-72 Flat head $7.00 |
Carbide
Spade Bit
|
|
|
82 degree Countersink
|
$ 9.00 each For drilling shallow holes in heat treated steel (detent ball) |
|
82-Degree Carbide Countersink 
|
For Flat Head Screws. Not for hardened steel. $18.00 |
| Washers |
Bronze Washers
.005 or .010 Please specify pivot size Teflon Washers .010 or
.015 Please specify pivot
size Nylatron Washers .013 or .015 Please specify pivot size |
| Stop
Pins:
Precision Ground Heat Treated (RC 60) |
3/32" x 3/8" $ .40 1/8" x 3/8" $ .40 3/16" x 1/2" $ .40 |
| Precision
REAMERS
(for perfect holes) Provided with appropriate drill bit |
3/32" REAMER with #43 Drill bit
$8.50 each 3/16" REAMER with # 13 drill bit $ 10.00 each 1/4" REAMER with # 1 drill bit $12.00 each |
| Counter
Bore
|
For
Handle Screws #0 for 0-80 Button and Pan Head Screws $18.00 #1 for 1-72 Button and Pan Head Screw $18.00 For Pivot Pin Screws #2 for 2-56 Button Head Screws 1/8" pilot for 1/8" pivot $14.00 #4 for 4-40 Button Head Screws 3/16" pilot for 3/16" pivot $14.00 |
| 1/16" Detent Balls | 440-C stainless steel (use #53 drill) $ .20 each |
| High
Speed Steel Taps
|
Tap Tap Drill Clearance drill Price 0-80 3/64" 1/16" $ 9.50 each 1-72 #53 or 1/16" 5/64" $ 9.50 each 2-56 #50 #43 $ 9.00 each 4-40 #43 #31 $ 6.00 each |
| Titanium 6-AL 4 V Sheet |
Thickness Size Price .032
10 x 12 $29.00 .050 10 x 12 $45.00 .060 (.062) 10 x 12 $55.00 |
| Stainless
Thumb Studs
|
3/16"
X 3/16" knurled sides, drilled and tapped for 1-72 Flat Head Screws (included) $1.50
|
